Video

Andrew Griesmer | December 9, 2014

Here’s a question for all you electromagnetics-focused simulation engineers out there: Have you ever looked in envy at your structural, fluid, and chemical counterparts as they mesh their models with the click of a button, while you struggle to mesh your infinite elements or perfectly matched layers? Well, now you too can enjoy automatic meshing with a click (or two). Let me show you how.

Read more ⇢

Article Categories

Andrew Griesmer | November 24, 2014

Importing meshes into COMSOL Multiphysics is often necessary when interfacing between different programs. With COMSOL Multiphysics version 5.0, these meshes can be converted into solid geometry objects for further investigation and modeling capabilities. You can also perform boolean operations on the new geometry for CFD, electromagetics, and acoustics applications.

Read more ⇢

Article Categories

Fanny Littmarck | October 31, 2014

It’s here. We have now released the latest version of COMSOL Multiphysics® simulation software — version 5.0 — and it’s revolutionary. Why? You will now be able to turn your COMSOL Multiphysics models into apps and share them with your colleagues and customers. We are also releasing three new add-on products and numerous updates to existing products. Here’s a quick run-down of the release news.

Read more ⇢

Article Categories

Andrew Griesmer | October 15, 2014

For anyone interested in modeling chemical reactions and/or flow through porous media, we have created a video to demonstrate how COMSOL Multiphysics simulation software handles such applications. Consider this your interactive tour of the model documentation for our porous reactor model.

Read more ⇢
Amelia Halliday | September 17, 2014

I have great news for anyone who is eager to learn the fundamentals of simulating structural mechanics in COMSOL Multiphysics. We have just published a completely revamped version of our video tutorial on the static bracket model. COMSOL Multiphysics version 4.4 and the Structural Mechanics Module are used to analyze the resultant forces, stresses, and deformations that occur on solid structures that are subjected to external loads.

Read more ⇢
Amelia Halliday | June 16, 2014

If you are searching for a tutorial on how to model a miniaturized 3D electromechanics problem, then look no further. We have just published an updated version of our video tutorial on how to simulate a capacitive pressure sensor. COMSOL Multiphysics version 4.4 and the MEMS Module are used to simulate the electrostatic, structural, and thermal physics that occur.

Read more ⇢

Article Categories

Fanny Littmarck | May 12, 2014

We have made a video tutorial for those of you who want to learn how to model stresses and strains in COMSOL Multiphysics. In under five minutes, we walk you through the modeling steps from setting up parameters and geometry to postprocessing the results. For simplicity’s sake, we use a wrench and bolt model to demo the concept.

Read more ⇢
Fanny Littmarck | May 2, 2014

It’s no news that accurate mechanical analysis is key to avoiding product failure and manufacturing issues. What may be new is how you do it. Simulation software offers a modern approach to analyzing mechanical component and system designs. Watch this video to learn how COMSOL Multiphysics enables you to speed up time-to-market and optimize product designs.

Read more ⇢

Article Categories

Fanny Littmarck | April 18, 2014

Did you know that you can use MATLAB® functions in your COMSOL Multiphysics® models? Well, you can, and in this video tutorial we will show you how, using LiveLink™ for MATLAB®.

Read more ⇢

Article Categories

Andrew Griesmer | November 28, 2013

Each COMSOL release aims to create a better modeling experience for our users, usually in the form of new add-on modules and new functionality in existing products. COMSOL 4.4 brings you all that, but it also includes another significant change: a brand new user interface (UI). The new UI contains a ribbon at the top of the interface (for our Windows® users) to make your modeling easier and faster. The ribbon gives you direct access to the functions you would […]

Read more ⇢

Article Categories

Andrew Griesmer | October 9, 2013

The process of quenching a red-hot metal object in a cool liquid bath is simple in practice, but highly complicated when creating a simulation. There are several phases of liquid quenching, and here we will focus on the initial phase: film boiling. In the accompanying video, COMSOL Certified Consultant AltaSim Technologies details the steps taken to model a nickel superalloy puck that is quenched in a tub of oil.

Read more ⇢

Article Categories

1 2 3 7