# COMSOL Blog

## Modeling a Light Bulb, All Forms of Heat Transfer

##### Fanny Littmarck | August 21, 2012

When it gets dark, you flick on the lights. If you were to model this simple example, you would need to take all forms of heat transfer within consideration; convection, conduction, and radiation are all at play when a light bulb is flicked on.

The example used to show how to model heat transfer in a recent webinar involved modeling the natural convection flow with heat in a light bulb. It was a particularly good problem to work through, as modeling a light bulb requires taking all three forms of heat transfer into account, as well as flow. First, you have conduction, when a 60W filament is heated thus transferring heat from the heat source to the light bulb. Then there’s convection, which drives a flow inside the bulb transferring the heat from the filament throughout the bulb via the movement of fluids (in this case that’s argon gas). Finally, there is the radiation portion of the problem, and in this case that includes surface-to-surface and surface-to-ambient radiation. Our Heat Transfer Module includes both of these types of radiation, so that you can account for shading and reflections between radiating surfaces, as well as ambient radiation that may be fixed or given by an arbitrary function. What makes this a multiphysics problem, and not “just” a heat transfer example, is of course the fact that the light bulb involves both heat transfer and flow. Below is a model of a light bulb where you can see the temperature distribution on the outside of the bulb and the distribution of temperature and pressure inside the bulb:

Free Convection in a Light Bulb

This example of natural convection in a light bulb is worked through step-by-step in this archived Heat Transfer webinar. Check it out if you want to learn how to set up and model such a multiphysics problem. Also have a closer look at the Free Convection in a Light Bulb model in our Model Gallery.

It’s a multiphysics world, and our software caters to engineers looking to model real-world applications.

#### Article Categories

1. Thomas Müller October 8, 2012 at 6:49 am

Very nice example. It combines several heat transfer mechanisms. Unfortunately, following the instructions (for version 4.2a) in the Model Gallery the simulation does not work.

2. Fanny Littmarck October 12, 2012 at 1:18 pm

The instructions should work for v4.2a as well. If you are having trouble, feel free to send an email to support@comsol.com for help.

3. abdennaceur karoui September 1, 2013 at 12:07 pm

The webinar is no longer available through the provided link ” archived Heat Transfer webinar”.