Chandan Kumar | April 3, 2013

Some structural applications involve thin or high aspect ratio structures sandwiched between other relatively low aspect ratio structures. For example, if a piezoelectric transducer is glued on the surface of a mechanical system, the thickness of the adhesive layer is very small in comparison to the two structures it glues together. Numerical modeling of such a thin layer in two or three dimensions requires resolving it with an appropriate finite element mesh. This can result in a large concentration of […]

Read more ⇢

Article Categories

Walter Frei | April 2, 2013

A question that comes up occasionally is whether or not you can compute the inductance of a single straight wire. This seemingly simple question actually does not really have an answer, and gives us the opportunity to talk about a very interesting point when solving Maxwell’s equations. Anybody working in the field of computational electromagnetics should have an understanding of this key concept, as it will help you properly set up and interpret models involving magnetic fields.

Read more ⇢

Article Categories

Fanny Littmarck | April 1, 2013

In the world of bearings, there are many different types to choose from. For certain applications, magnetic bearings trump their mechanical counterparts in several regards. In order to understand how the bearing will perform, using a simulation tool to calculate design parameters is a good idea.

Read more ⇢

Article Categories

Fanny Littmarck | March 29, 2013

Smart materials are able to convert one form of energy to another. These materials can be either solid or fluid, and are typically located within what’s called a smart structure. What makes these materials and structures so “smart”? Let’s find out.

Read more ⇢

Article Categories

Kristen O'Connor | March 28, 2013

As many of you may know, we have officially announced the dates for the COMSOL Conference 2013. Did you also know that we are continuously sharing updates, deadline reminders, past published Conference User Presentations, and more through social media? Follow our social pages to make sure you have up-to-date information regarding the Conference (among other things) — don’t forget to share this content with your friends and colleagues, too.

Read more ⇢

Article Categories

Daniel Smith | March 27, 2013

In a previous blog entry I discussed some of the exotic properties of graphene. The fact that graphene consists of a single layer of atoms means the aspect ratio of any graphene-based structure may be very high. High aspect geometries present their own array of modeling challenges.

Read more ⇢
Valerio Marra | March 26, 2013

A lot of effort is put into inventing or improving existing technologies used to cool buildings, food, or any goods that need to be stored at a definite temperature. The reason is simple: adopting more efficient designs will result in achieving the same goal while consuming less energy. Both our balance sheet and the environment will benefit from these solutions. Here we will explore modeling temperature of a passive cooling design using a wine cellar as an example.

Read more ⇢

Article Categories

Phil Kinnane | March 25, 2013

Dr. Raj Thiagarajan is a prolific producer of interesting research articles ranging from waste-water treatment to acoustics metamaterials, and lots in between. As the Managing Director at ATOA (“Atom TO Application”) Scientific Technologies, a COMSOL Certified Consultant, Raj has had to simulate all types of applications. Now he will show you how to use multiphysics simulations in multimaterial and composite product design.

Read more ⇢

Article Categories

Bethany Moatts | March 22, 2013

Looking for ways to cut down on the time and computer memory required to run your simulation? Does your model exhibit some form of symmetry — axial symmetry, lines or planes of symmetry, or antisymmetry for example? Or perhaps your model exhibits periodicity? If you answered yes to those questions, you’re in luck. You can model symmetry or periodicity in COMSOL Multiphysics easily by either using a 1D or 2D axisymmetric dimensional simulation or by incorporating boundary conditions that represent […]

Read more ⇢

Article Categories

Andrew Griesmer | March 21, 2013

Online engineering magazines, like Design World and Desktop Engineering, are great for anyone out there interested in emerging technologies. I especially liked a few recent articles: two in Design World’s “CAE Solutions” section and one in Desktop Engineering’s simulation section, detailing a couple of major topics important to finite element analysis, or FEA. First there is meshing, the foundation of FEA software. Second, there is optimization, which is all about maximizing efficiency and improving results. The key for any production […]

Read more ⇢

Article Categories

Walter Frei | March 20, 2013

There is sometimes a need to include data from other simulation packages into a COMSOL Multiphysics model. There are a variety of ways in which this can be done, but one of the easiest approaches is to read in the point cloud data via a spreadsheet format text file. In this blog post, we walk through the steps of reading in such data, and using it in a COMSOL model.

Read more ⇢

Article Categories

1 32 33 34 35 36 66