Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to calculate the permeability on the model of a fiber tow
Posted Feb 15, 2016, 12:31 p.m. EST Fluid & Heat, Computational Fluid Dynamics (CFD) Version 5.1, Version 5.2 1 Reply
Please login with a confirmed email address before reporting spam
I set up a model of a fiber tow, but I do not know how to choose the "study" to start simulation and calculate the permeability. Thanks a lot!
Attachments:
1 Reply Last Post Feb 18, 2016, 8:38 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Dear Chen,
I invite you to take a look at the following model :
www.comsol.com/model/permeability-estimation-33331
It consists in the modelling of a fluid flow through a porous material, using laminar (Navier-Stokes) flow equations. You can also look at this video :
www.comsol.com/video/how-set-up-run-simulation-comsol-multiphysics
which explains how to set up and run a simulation with COMSOL Multiphysics.
I hope it will help you. Do not hesitate also to contact the technical support if you other questions.
Best regards,
Nathan Martin
Tél : 04 76 46 49 01
support@comsol.fr
COMSOL France
WTC, 5 Place R. Schuman 38000 Grenoble
I invite you to take a look at the following model :
www.comsol.com/model/permeability-estimation-33331
It consists in the modelling of a fluid flow through a porous material, using laminar (Navier-Stokes) flow equations. You can also look at this video :
www.comsol.com/video/how-set-up-run-simulation-comsol-multiphysics
which explains how to set up and run a simulation with COMSOL Multiphysics.
I hope it will help you. Do not hesitate also to contact the technical support if you other questions.
Best regards,
Nathan Martin
Tél : 04 76 46 49 01
support@comsol.fr
COMSOL France
WTC, 5 Place R. Schuman 38000 Grenoble