Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

Formation Of Porosities During Spot Laser Welding : Case Of Tantalum Joining

C. Touvrey
CEA Valduc, France

During the welding of tantalum with a ND: YAG pulsed laser, a deep and narrow cavity, called the keyhole, is formed. At the end of the process, surface tension forces provoke the collapse of the keyhole. For important interface deformations, gas bubbles can be trapped into the melting pool. If the solidification time is insufficient, these bubbles give birth to residual porosities. The aim of ...

Microwave Heating at the Grain Level

S. Lefeuvre[1], and O. Gomonova[2]
[1]Eurl Creawave, Toulouse, France
[2]Siberian State Aerospace University, Krasnoyarsk, Russia

The microwave heating and processing of heterogeneous material is usually simulated using a set of coupled PDE equations in an homogeneous medium. Nowadays it is possible to describe more accurately the process with a suitable description of the heterogeneities that is at the grain level. Many authors work with spheres (circles) to represent the grains but it is difficult to achieve an ...

Air Flow Characteristics Inside an Industrial Wood Pallet Drying Kiln

A-G. Ghiaus, M-A. Istrate, and A-M. Georgescu
Technical University of Civil Egineering, Bucharest, Romania

Analysis and optimization of air flow distribution inside drying kiln systems contribute to the improvement of the final product quality. The present study reports on the threedimensional numerical solution of air flow within a drying kiln enclosure. The air flow field is examined in different configurations and operation conditions. Depending on the off/on switched fans, we obtain various air ...

Solid Target Cooling for High Power Neutrino Super Beam

B. Lepers, and C. Bobeth
IPHC, CNRS, Strasbourg, France

The feasibility of water cooling is investigated for a solid target which is integrated as the inner conductor in a magnetic horn for secondary particle focusing (pi; K) as used in conventional neutrino beam accelerator experiment. A simple axi-symmetric thermal model calculated in COMSOL is used to obtain the temperature distribution inside the target for different values of h; power beam and ...

Thermal FEM Simulation Of A Multilevel Lab On Chip Device For Genetic Analysis

E. Giuri, A. Ricci, and S.L. Marasso
Politecnico di Torino, Materials Science and Chemical Engineering Department, Turin, Italy

In this work, time dependent thermal analyses, performed on the 3D FE model of a multilevel Lab on Chip (LOC) platform are executed in order to gain insight into the temperature distribution within the device. By means of the COMSOL Multiphysics CAD import module, an extremely close 3D reproduction of the actual device, allowing to probe temperatures in those regions where an experimental ...

From customer requirement to product requirement with COMSOL

A.B. Nilsson
BD Medical - Medical Surgical Systems, Helsingborg, Sweden

Anders B Nilsson graduated M. Sc. in engineering physics from Lund University in Sweden. He has been working in the R&D department at BD Medical as principal engineer and project leader since 2005. He uses COMSOL for a wide range of functions, such as early concept development and qualification of products.

Equation-Based Modeling: The Structural Contact Problem Solved by The Velocity Approach

O. Toscanelli, and V. Colla
Scuola Superiore S. Anna, Pisa, Italy

The contact between infinitely rigid body and deformable part is studied using the velocity as a dependent variable. A simple forging case is evaluated. The velocity approach is realized by means of using COMSOL with the Equation-Based Modeling. The contact model evaluated in this work is suitable to model the forging process. For a given mesh and element it is possible to choose the optimum ...

Space Charge Compensation of Negative Ion Beams

M.Cavenago[1], and P. Veltri[2]
[1]INFN-LNL, Legnaro, PD, Italy
[2]Consorzio RFX, Padova, Italy

Neutral Beam Injectors for ITER require development of negative ion sources and beams with carefully reduced beam divergence. In the accelerator this is compensated by the focusing due to the fringe effect of the electric field, while in the drift region, where the beam is propagating without further acceleration, a background positive charge is required to assure beam transmission with small ...

Numerical Inversion of Surface Deformation at Long Valley Caldera (California) By Using 3D Mechanical Models

S. Pepe, P. Tizzani, and A. Manconi
IREA-CNR, Napoli, Italy

We use 3D numerical models to analyze the ground deformation observed at Long Valley Caldera (LVC) between 1992 and 2000 via space-based geodetic techniques. More specifically, we implement a complex model that includes the topography and the material heterogeneities information of LVC. The 3D heterogeneous models are implemented of COMSOL models in a Genetic Algorithm optimization to constrain ...

Evaluation of CO2 Leakages From An Aquifer Storage

A. Thoraval[1], R. Farret[2], A. Cherkaoui[2], and P. Gombert[2]
[1]INERIS, Nancy, France
[2]INERIS, Verneuil, France

This paper presents preliminary estimations of CO2 overpressure into the reservoir and CO2 leakage through the caprock and the overburden. A simple, two-phase flow model in porous media based on Darcy’s law was used, in order to explore easily long time periods. The models produced by COMSOL Multiphysics allow sensitivity studies and preliminary evaluations of the relations between CO2 leakage ...

1 - 10 of 185 First | < Previous | Next > | Last