Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

Optimizing Performance of Equipment for Thermostimulation of Muscle Tissue using COMSOL Multiphysics

J. Kocbach[1], K. Folgerø[1], L. Mohn[2], O. Brix[3]
[1]Christian Michelsen Research, Bergen, Norway
[2]Luzmon Norway, Bergen, Norway
[3]Michelsen Medical, Bergen, Norway

The design challenge for thermostimulation equipment is to get a combination of high electric field strength and high temperature within the muscle tissue without causing pain or skin burns. In the present work, COMSOL Multiphysics is used to simulate the temperature distribution and electric field distribution within body tissue for varying body composition and varying design parameters of the ...

Design of MEMS based Polymer Microphone for Hearing Aid Application

V. S. Nagaraja[1], Ramanuja H. S.[1], Deepak K[1], S. L. Pinjare[1]
[1]Electronics and Communication Engineering, Nitte Meenakshi Institute of Technology, Bangalore, Karnataka, India

In this work, a MEMS based condenser microphone [1,2] using Polyimide as the diaphragm has been designed. The microphone structure has a backplate placed on top of the diaphragm. The backplate and the diaphragm are made up of polyimide. The two polyimide plates are separated by air gap which is achieved by using Aluminium as a sacrificial layer in between, which is etched away to create the air ...

Designing and Simulating the Performance Analysis of Piezoresistive Fluid Flow Pressure Sensor

K. PraveenKumar[1], P. Suresh[1], K. Subash[1], M. Alagappan[1], A. Gupta[1]
[1]PSG College of Technology, Coimbatore, Tamil Nadu, India.

In this work, we present the performance analysis of novel micro machined Piezoresistive fluid flow pressure sensor using COMSOL Multiphysics. The principle of the sensing mechanism is based on the deflection of four sensing layers embedded on a thin membrane. The fluid passes through the layer causes the deflection of the sensing layer which measures the pressure of the fluid. The following ...

Multiphysics Software Applications in Reverse Engineering

W. Wang[1], K. Genc[2]
[1]University of Massachusetts, Lowell, MA, USA
[2]Simpleware, Exeter, United Kingdom

During the past decade reverse engineering has become a common and acceptable practice utilized by many aftermarket suppliers, and even original equipment manufacturers (OEM). This presentation focuses on the applications of multiphysics software such as COMSOL and Simpleware® in reinventing the design details and manufacturing processes of an existing part in the absence of the original design ...

Coupled Electromagnetic and Heat Transfer Simulations for RF Applicator Design for Efficient Heating of Materials

C. Thiagarajan[1], J. Anto[2]
[1]ATOA Scientific Technologies Pvt Ltd, Whitefield, Bangalore, Karnataka India.

Conventional heating of material wastes energy during heating due to inherent radiation, conduction and convection based heating mechanism. Alternate efficient heating methods are actively researched for improved efficiency. Radio frequency based electromagnetic heating is increasingly used for efficient heating in place of conventional heating. This requires coupling of electromagnetic and heat ...

A MEMS Condenser Microphone for Consumer Applications

S. Kesari[1], A. Pandit[1], K. Mishra[1], Kaushal B. K.[1]
[1]Electronics and Communication Engineering, Nitte Meenakshi Institute of Technology, Bangalore, India

The MEMS microphone is also called microphone chip or silicon microphone.The pressure sensitive diaphragm is etched directly into a silicon chip by MEMS techniques and is usually accompanied with integrated preamplifier. Most MEMS microphones are variants of the condenser microphone design. The device consists of a polysilicon diaphragm suspended over a single crystal silicon backplate ...

Relevance of Hydro-Mechanical-Chemical Processes Involved in the Construction and Operation of Copper Heap Leach Pads

M. Tincopa[1], A. Nardi[2], G. Roman-Ross[2] , J. Molinero[2]
[1]Technic University of Catalonia (UPC), Barcelona, Spain
[2]Amphos 21 Consulting, Barcelona, Spain

Heap leaching in the mining industry had become a sophisticated practice at least 500 years ago. It is a mineral processing technology whereby piles of crushed Run-of–Mine rock are leached with chemical solutions to extract minerals. The goal of this work is to contribute to the understanding of the behavior of a heap leach pad by using coupled Hydro-Mechanical-Chemical simulations. COMSOL ...

Detector and Calibration-source Models for the SAFARI Detector Test Facility

M. Audley[1], G. de Lange[1], C. Bracken[2]
[1]SRON Netherlands Institute for Space Research, Groningen, The Netherlands
[2]National University of Ireland, Maynooth, Ireland

SAFARI is a far-infrared imaging spectrometer for the Japanese satellite observatory SPICA. SAFARI covers the wavelength range 34—210 μm (1.4—8.8 THz) using Transition-Edge-Sensor (TES) bolometers. We have built a test facility to qualify and characterize the SAFARI focal plane units using cryogenic optical calibration sources. To support this work we have used COMSOL Multiphysics® to model the ...

Calculation in Coupling Coefficient of 1.3μm Quantum Dots Distributed Feed Back Laser with Half Etched Mesa Structure

Keishiro GOSHIMA et al.[1]

[1]Aichi Institute of Technology, Toyota, Aichi, Japan

Quantum Dots (QDs) laser is expected to have a low threshold current density and high thermal stability. We propose the QDs laser with the half-etched mesa distributed feedback (HEM DFB) structure. We accurately calculated the coupling coefficient in a HEM waveguide using the finite element method (FEM).

Virtual Prototype Evolution by COMSOL Multiphysics® of a Continuous Flow Animal By-Products ABP Ohmic Sterilization Unit - new

R. Heslop[1]
[1]C-Tech Innovation Ltd., Capenhurst, Cheshire, UK

Ohmic heating (Joule heating) is a volumetric heating technology which can effectively process almost any pumpable fluid with extremely high energy efficiency (>95%). This is particularly useful for very thick fluids, those that burn on to hot surfaces and those with high solids content which would cause difficulties for conventional heating techniques. Processing of animal by-products (ABP) ...