Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.
COMSOL-News-Magazine-2017
COMSOL-News-Magazine-2017-Special-edition-acoustics
COMSOL-News-Magazine-2016

Design of High Performance Micromixer for Lab-On-Chip (LOC) Applications

K. Karthikeyan[1] , L. Sujatha[1]
[1]Rajalakshmi Engineering College, Chennai, Tamil Nadu, India

This paper presents the design and simulation of micromixer for Lab-On-Chip (LOC) applications. There are two types of micromixers: one is an active micromixer and another one is a passive micromixer. This paper investigates microfluidic flow characterization and mixing rate of two fluids in a micro- channel. Understanding the microfluidic flow at the micro channel is a develop methods of mixing ...

Optimization of Smart Diaphragm Material for Pressure Sensor in Ventilators

M. Algappan[1], P. C. Chakravarthi[1], R. Keerthana[1], S. Mangayarkarasi[1], A. Kandaswamy[1]
[1]PSG College of Technology, Coimbatore, Tamil Nadu, India

A medical ventilator is an imperative device used to save life by delivering an assortment of air and oxygen into and out of the patients’ lungs to administer breathing or to assist obligatory breathing. The commercially available diaphragm based pressure sensors made up of silicon measure the air and oxygen flow. The proposed work utilizes the Piezo electric material for the pressure range ...

Estimation of Critical Parameters of Drop-Drop Electrocoalescence Using a Multiple-Drop System - new

S. S. Kulkarni[1], V. A. Juvekar[1], A. Chheda[2]
[1]Indian Institute of Technology Bombay, Mumbai, Maharashtra, India
[2]Institute of Chemical Technology, Mumbai, Maharashtra, India

Electrocoalescence is the phenomenon of coalescence of droplets suspended in an insulating liquid or in a gas under the action of an electric field. Electrocoalescence is considered a promising tool in many petrochemical industries for desalting crude oils. However, this technique suffers from some drawbacks such as short circuiting of electrodes, limitations on applied electric field and its ...

The Effect of Resistance on Rocket Injector Acoustics

C. J. Morgan [1], S. R. Fischbach [1],
[1] Jacobs ESSSA Group, NASA Marshall Space Flight Center, Huntsville, AL, USA

This study evaluates the effect of injector resistance on the mode shapes and complex eigenfrequencies of an injector/combustion chamber system by defining a high Mach-flow, potential flow form of the convective wave equation in the Coefficient Form PDE Mathematics interface. Background steady-state flow conditions are determined through a NASA Marshall Space Flight Center in-house fluid ...

电磁力作用下金属小车的减速刹车过程研究

李晓南 [1], 刘国强 [1],
[1] 中国科学院电工研究所,北京,中国

利用惯性力学和电磁学,研究了一个金属小车沿着磁铁铺就的轨道做减速直线运动。其中,小车也可以看成是携带等量的磁铁剩磁,且沿着铁磁轨道减速运动。通过赋予小车一个初速度,例如100 m/s,然后再根据实际情况、赋予它一个特征密度,即小车有了一定的质量。当认为小车沿水平方向的轨道减速运动,忽略重力、空气阻力等其他一些影响因素时,小车将只受电磁的洛伦兹力的作用,而逐渐减速到零。 利用最新版的 COMSOL Multiphysics®,建模过程中,主要用到了“磁场和电场(mef)”和“全局常微分和微分代数方程(ge)”接口,涉及到的动力学和电磁学方程为 dv/dt=F/m F ⃗=∫_(V_vehicle)▒〖(J_induced ) ⃗×B ⃗dv〗 J_(i_y)=σ(v_z∙B_x-v_x∙B_z ) v 为小车即时速度,F 为洛伦兹力,J 为感应产生的涡流,v 为速度,B ...

Simulation of Electro-Thermal Behavior of an Overlap Solder Interconnection

A. Koushki [1],
[1] Rostock University, Rostock, Germany

Solder connections are one of the most essential parts of the PCBs. Despite many well-known scientific works that have been done about overlap solder interconnection properties, such as fracture, fatigue and reliability studies, little attention have been given to the investigation of the connection between effects of electrical properties and laboratory soldering shortages such as effects of ...

Optimization of an Electrochemistry System

D. Mi [1],
[1] KEISOKU Engineering System Co., Ltd., Chiyoda-ku, Tokyo, Japan

Optimization of a typical electrochemical system with insulating shields is considered in this work, which objective is to reduce the current peak due to singularity and smooth the current density distribution along electrode surface. Moving mesh method was adopted to allow change in design variables, i.e., position and width of the insulating shields. It was found that combining optimization ...

Investigation of Performance of SOFC in Hydrocarbon Fuel

S. T. Aruna [1], S. Senthil[1], S. Chauhan [1], B. Shriprakash [1],
[1] CSIR-National Aerospace Laboratories, Bangalore, Karnataka, India.

SOFC is a high temperature electrochemical device known for its fuel flexibility. Apart from using pure hydrogen, it can utilize CO (carbon monoxide), CH4 (methane) or any other higher hydrocarbon. Since methane is highly researched hydrocarbon fuel, it was chosen to start with. The most prominent problem faced while using hydrocarbon fuel in SOFC is the formation and deposition of carbon on the ...

Hybrid Multiscale Modeling of Corrosion Nanoinhibitors Transport

C. Trenado[1], D. Strauss[1,2], and M. Wittmar[2]
[1]Computational Diagnostics & Biocybernetics Unit, Saarland University Hospital, Homburg, Germany
[2]Leibniz-Institute for New Materials, Saarbrücken, Germany

Progress in coating technology has allowed for the development of free-chromate corrosion inhibitors, which are able to smartly migrate when required. In order to support the coating design, we propose a hybrid mathematical model to study the inhibitor's release by taking into account the thermodynamics and kinetics involved in the corrosion process. The proposed model is ...

Finite Element Modeling of Dielectric-Paraelectric Composite Materials

K. Zhou, S. Alpay, and S. Boggs
Institute of Material Science, University of Connecticut, Storrs, CT, USA

Finite Element analysis is used to model 2-D and 3-D paraelectric-dielectric composites (BaTiO3 spherical fillers randomly distributed in constant dielectric matrix). The effective dielectric response and tunability are studied under different filler sizes and different volume fractions. The results are consistent with previous theoretical and experimental results: with the increasing of filler ...