Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

simulation a new material

Please login with a confirmed email address before reporting spam

If I want to simulate a new material, such as liquid crystals, and I can't find the material library in COMSOL. What can I do? or I can input the new material coefficients in COMSOL?
Thanks a lot!!!

3 Replies Last Post May 29, 2012, 4:20 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 29, 2012, 2:10 a.m. EDT
Hi

check the doc, you can generate your own material structure and save it into your own library

--
Good luck
Ivar
Hi check the doc, you can generate your own material structure and save it into your own library -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 29, 2012, 2:31 a.m. EDT
thanks to Ivar~
But I don't know your mean with "check the doc" .
thanks~
thanks to Ivar~ But I don't know your mean with "check the doc" . thanks~

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 29, 2012, 4:20 a.m. EDT
Hi

The numerous pages of the COMSOL PDF documentation files ;)

To find your way therein, I stronglxy suggest that you run some kind of indexer of the doc, then you can quicker find your way therein by searching for keywords

--
Good luck
Ivar
Hi The numerous pages of the COMSOL PDF documentation files ;) To find your way therein, I stronglxy suggest that you run some kind of indexer of the doc, then you can quicker find your way therein by searching for keywords -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.